aery design challenge 2
Design two is a predetermined design with dimensions give. Design was started with given dimensions in a pre-loaded glider present upon opening of program:
The following dimensions were given and input into the AERY program:
Glider "Will it Fly" test results below:
To fix the glider, the mass of the nose was reduced to 1 gram from 10. Next, the stabilizer had its span reduced to 5cm and the leading edge sweep angle changed to 25 degrees. The vertical tail had to be totally changed. The height was changed to 15cm, the root chord to 10 cm, and finally the taper ratio to .9. The vertical tail was also moved to 20 cm along the fuselage. image of the final plane design along with the "Will it Fly?" test, along with plane information, is below: